It bites in
Eco-solvent ink carries pigment in a mild solvent. The solvent softens the top of the print coating for a moment, the pigment settles into it, and the surface closes again. The colour ends up in the material, not sitting on top of it.
Every Ridge & Range piece is made to order in Colorado Springs, on a 75-inch eco-solvent printer built around Epson’s I3200 print head. This page is about how that works, and why it shows on your wall.

Ridge & Range Art began as a small Etsy shop in Colorado Springs with one idea: the walls of a cabin, a lodge or a ranch office should look like the country outside them.
We print in our own studio, on our own machine. Nothing is forwarded to a warehouse we have never seen, so every piece passes in front of us before it leaves.
That is still how it works. You pick the artwork, the size and the finish. We prepare that one file, print that one piece, and send it to your door.
Our printer is a 75-inch Signstech eco-solvent machine. It is the kind of equipment sign shops use for banners and vehicle graphics, which means it is built to run wide, run long and hold its colour. We use that headroom for something quieter: wall art with nothing to hide.
The Epson I3200 head rides a rail across the full width, laying down one 33.8 mm band of ink per pass. Overlapping passes hide the seams between bands.
Cyan, magenta, yellow and black eco-solvent ink, fed to the head from bulk tanks so colour stays consistent from the first inch to the last.
Warmth under the media opens up its coating so the ink keys in, then drives off the carrier so the print leaves the machine dry to the touch.
Up to 75 inches wide. Our largest piece, a 60 × 40 inch canvas, fits with room to spare for the wrap around the stretcher.
Finished prints wind onto a roller under even tension, so nothing drags, creases or touches the floor.
The part that touches your print, without ever touching it, is an Epson I3200 PrecisionCore head. Its 3,200 nozzles are made with the same thin-film techniques used for microchips, and each one fires ink by flexing a tiny piezo crystal. No heat is involved, so the ink arrives exactly as it was mixed.
What makes the difference is that every nozzle can fire three different droplet sizes. Small drops draw the fine things: whiskers, pine needles, the grain in a saddle. Larger drops fill skies and shadows smoothly. Mixing them is how a print gets soft gradients with no visible dot pattern.
Droplets drawn to scale against the thickness of a typical human hair. Diameters are worked out from the droplet volumes.
Figures from Epson’s data sheet for the I3200(4)-E1, the eco-solvent version of the head.
We print with eco-solvent pigment ink. It is the reason our canvases can hang without glass and still look the way they did the day they left.
Eco-solvent ink carries pigment in a mild solvent. The solvent softens the top of the print coating for a moment, the pigment settles into it, and the surface closes again. The colour ends up in the material, not sitting on top of it.
Because the pigment is locked into the coating, the print resists water, handling and scuffs. That matters for canvas, which hangs without glass in front of it.
Pigment, not dye, gives deep blacks and saturated colour: the copper of last light, the green-black of timber, the blue in a trout’s back.
A print can only be as good as what it is printed on. We keep the list short and print every piece on material chosen for this ink and this printer.
High-quality photo paper, printed edge to edge. Smooth enough to hold the finest detail the head can lay down. Ships unframed, ready for the frame you already love.
Printed canvas stretched over a wood stretcher, with the image carried around the sides. No glass and no glare, and it is ready to hang.
The same stretched canvas set inside a slim floating frame, with a hairline shadow gap all the way round. Nine finishes.
Not sure which to pick? Compare the three side by side, or read how to look after each one.
No machine knows that the elk should not be cut off at the antlers. Before anything is printed, someone here prepares the file for the exact piece you ordered.
Every image is looked at by a person before it goes near the printer. We check sharpness, colour and anything that would look wrong at full size.
A 10 × 8 and a 60 × 40 are not the same shape. We reposition each piece by hand for the size you ordered so the subject sits where it should, not wherever an automatic crop left it.
On canvas, the image continues around the sides of the stretcher. We extend the edges so the wrap has picture on it and nothing important disappears round the corner.
Large canvases need far more pixels than a screen does. We upscale artwork, and customer photos, so a big print stays crisp when you walk up to it.
Then it is printed, given time to cure, stretched or trimmed, checked once more and packed for the trip.
